What Is Standard Tyre Fitting?

Standard tyre fitting is the process of removing your existing tyres and mounting new ones on your vehicle's wheels. At FixMyTyreNow, we bring a fully equipped mobile fitting van directly to your location across all 32 London boroughs — no garage visit required. A full standard tyre fitting takes approximately 45 minutes per tyre and includes removal of the old tyre, mounting of the new tyre, computerised wheel balancing, inflation to the manufacturer's recommended pressure, and a torque check on all wheel bolts.

What's Included in Every Standard Tyre Fit

Old tyre removal — the wheel is removed from your vehicle and the existing tyre broken off the rim safely
New tyre mounting — the replacement tyre is seated on the rim and bead sealed
Computerised wheel balancing — weights are applied to eliminate vibration at speed
Inflation to spec — pressures set to your vehicle manufacturer's recommendation (found on the door sill sticker)
Torque check — all wheel bolts tightened to the correct torque specification using a calibrated wrench
TPMS reset — where applicable, we reset your tyre pressure monitoring system warning light

Tyre Brands We Stock

Our vans carry a curated stock of the most common tyre sizes across all major brand tiers. Premium brands include Michelin, Continental, Pirelli, Bridgestone, and Goodyear. Mid-range options include Hankook, Yokohama, and Falken. Budget alternatives from Nexen, Landsail, and Radar are also available. All tyres are sourced from authorised UK distributors and carry the full manufacturer's warranty.

If your vehicle requires a less common size or a specific brand not held in stock, we can usually source it from a nearby distribution depot within 30–60 minutes. We'll confirm availability and price before dispatch so there are no surprises.

How to Choose the Right Tyres

Your tyre size is printed on the sidewall of your existing tyres in a format such as 205/55 R16 91V. The first number is the width in millimetres, the second is the aspect ratio (sidewall height as a percentage of width), R indicates radial construction, the third number is the rim diameter in inches, and the final number and letter indicate load index and speed rating. Always replace tyres with the same size, or consult your vehicle handbook for approved alternatives.

As a general rule: if you drive mostly in the city at lower speeds, a mid-range tyre will perform comparably to a premium brand in those conditions. If you regularly use motorways or drive a performance vehicle, the handling differences between budget and premium tyres become more significant, particularly in wet conditions. Our technicians can advise you on the best option for your driving pattern and vehicle when they arrive.

When to Replace Your Tyres

UK law requires a minimum tread depth of 1.6mm across the central three-quarters of the tyre's width. Driving on tyres below this limit carries a fine of up to £2,500 per tyre and three penalty points on your licence. In practice, tyre performance — particularly braking distances in wet conditions — begins to deteriorate significantly below 3mm. Most tyre manufacturers recommend replacement at 3mm rather than waiting until the legal minimum.

Beyond tread depth, replace tyres if you observe any of the following: cracks or bulges in the sidewall, damage from kerb impacts, a tyre that repeatedly loses pressure, vibration that persists after balancing, or any tyre over 10 years old regardless of apparent condition. Age degrades the rubber compounds even when tread depth appears adequate.

Same-Day and Emergency Standard Fitting

Standard tyre fitting is available same-day across all London boroughs. For non-urgent replacements — worn tyres, seasonal changeovers, or scheduled replacements — book a convenient slot online and our technician will arrive within the agreed window. For situations where a tyre has been driven to failure or is unsafe to drive on, we dispatch in emergency mode with the same 20-minute average arrival time as our emergency replacement service.

All appointments require a £10 deposit at booking, which is deducted from your final invoice. The balance is payable on completion by card, Apple Pay, Google Pay, or bank transfer.

Frequently Asked Questions

Do I need to be present while the tyres are fitted?

Yes. We require the vehicle owner or an authorised representative to be present to confirm the work before we begin and to make payment on completion. You don't need to stay with the van — you can go back indoors — but we do need someone reachable by phone.

Can you fit run-flat tyres as standard fitting?

Run-flat tyre replacement is a specialist service due to the additional equipment required to break the reinforced sidewall. It is available from £110 and is listed separately. If you're unsure whether your tyres are run-flats, check for an RFT, ROF, or SSR marking on the sidewall.

Will you dispose of my old tyres?

Yes. We take old tyres away and dispose of them through a licensed tyre recycling facility at no extra charge. You don't need to arrange disposal yourself.

How long does a standard tyre fitting take?

Fitting a single tyre takes approximately 30–45 minutes including balancing. Two tyres on the same axle take around 60–75 minutes. We aim to complete the job and be off your driveway or car park within the hour.

Standard Tyre Fitting — Areas We Cover

JavaScript is required for online booking. Please call 07340 645595 to book directly.

Technicians Available Now · ⏱ ~20 min arrival · 📍 All 32 London boroughs · 🔒 Secure payment

Your Name *

Phone Number * We'll call you to confirm arrival time

Email Address * We'll send your booking confirmation here

Your Location *

Vehicle Reg

Tyre Size

Preferred Date *

Preferred Time

Additional Notes

Booking deposit (deducted from final invoice) £10.00

Remaining balance due to technician on the day

🔒 Paid via Revolut

No account needed · Pay deposit securely via Revolut · Balance paid to technician on the day